Zero V.O.C. Exterior/Interior Masonary & Wood Finish
This premium acrylic finish is the latest in technology of zero V.O.C. coatings. It is primarily designed for
exterior surfaces of properly prepared wood and masonry as well as primed metal. Use as a solid color stain
on new select grade wood or use as stucco finish for new or repaint work. This attractive flat finish protects
the surface with a flexible film that is highly resistant to fading, chalking and blistering. The benefit of a Zero
V.O.C. formulation makes this product a favorite for schools, hospitals and public buildings needing a durable
White, Stock Colors, as well as custom tinting full spectrum of colors. Factory Custom colors with a 100 gallon minimum.
Quarts, Gallons, 5 Gallon Pails.
Properly primed wood, masonry, and metal.
To Touch - 1 Hour.
To Recoat - 4 to 6 Hours.
Under normal weather conditions @70° F, 50% relative humidity.
250-400 sq ft per gallon depending on surface texture and porosity of surface.
All surfaces must be clean and dry and free of dust, loose paint, and surface contaminants that may impair adhesion.
Does not exceed 0 grams per liter.
Airless or conventional spray, brush or roll.
Recommended primers are listed below.
Block - #S105 Block Filler.
Drywall - #PV101 PVA Sealer.
Stucco - #7509 Efflorescence Blocker.
Tilt-Up or Brick - #95 Busan Acrylic Primer, #325 Draw Tite.
Wood (new) - #95 Busan Acrylic Primer, #78 High Build Undercoat, #63 Dynacoat Enamel Undercoat (interior only).
Wood (painted) - #300 Bus-Stop Acrylic Primer, #97 Selz².
Metal (ferrous) - #301 Rust Stop Red Oxide Primer, #302 Rust Stop White Primer.
Metal (non-ferrous) - #95 Busan Acrylic Primer, #302 Rust Stop White Primer, #300 Bus-Stop Acrylic Primer, #97 Selz².
Small amount of clean water if required.
Soap and warm water clean up.